Whirlpool 12001655 Oven Sensor short
More Information:
This Part Fits the Following Models
876 models:
74004470|74004944|74005192|04000051|12001555|74003413|7430P001-60|7430P002-60|7430P004-60|7430P007-60|7430P007-60K|7430P009-60
Step 2: The screws securing the back panel should be taken out, then the back panel should be detached. Typically, these screws are positioned at the corners and sides of the oven's rear.
Step 3: The malfunctioning sensor on the back wall should be identified, within your oven. It should appear as a metal tube leading into an electrical connector.
Step 4: The electrical connection to the sensor should be unplugged by gripping the connector and pulling it out directly.
Step 5: The mounting screws that secure the sensor should be removed using a Phillips-head screwdriver.
Step 6: The defective sensor should be extracted and disposed of.
Step 7: The new sensor should be positioned into the mounting aperture on the back wall of the oven, then it should be fastened with the mounting screws.
Step 8: The electrical connection to the new sensor should be reattached by pushing the connector straight in.
Step 9: A multimeter should be utilized to verify that the sensor is functioning correctly.
Step 10: The back panel of the oven should be reattached and secured with the mounting screws.
Step 11: The power cord should be reconnected to the wall outlet and the oven should be switched on.
Step 12: The oven should be checked to confirm it is operating properly.
Well done! The 12001655 Whirlpool Oven Sensor has been successfully replaced by you.
Please remember, these directions are served as general advice and should always be utilized alongside the manufacturer's manual, if accessible.
Customer Reviews
No reviews yet. Be the first to write one!