Samsung DC47-00018A Dryer High-Limit Thermostat
More Information:
This Part Fits the Following Models
276 modelsStep 2: Take Down the Old Thermostat: The existing thermostat should be removed from the wall and all the mounting screws or fastening devices that secure it should be extracted. A flathead screwdriver or nut driver may be necessary for this step. The thermostat should be carefully pulled away from the wall and placed aside.
Step 3: Label the Wiring: After the thermostat has been taken off, a marker should be utilized to tag each wire. This will assist you in recalling where each wire connects when it's time to reattach them.
Step 4: Attach the New Thermostat: Your new Samsung DC47-00018A thermostat should be retrieved and each of the tagged wires should be linked to their respective terminals on the new unit. The guidelines provided in the device’s manual should be consulted and adhered to, as this will support a proper installation process.
Step 5: Install the New Thermostat: After all the wires have been connected, the new thermostat should be secured to the wall utilizing the correct mounting hardware.
Step 6: Verify the Connections: Before reactivating the new thermostat, it should ensure that your wire connections are thoroughly checked to confirm that everything is installed correctly. Then the power should be restored, and your new device should be tested to verify its proper operation.
Please remember, these instructions serve as general guidance and should always be used alongside the manufacturer's manual, if one is available.
Customer Reviews
No reviews yet. Be the first to write one!